Tag Archives: Fabric bunting

Bunting: A tutorial

Hello everyone.  Today I make my first attempt at writing a tutorial, especially after all the gripping I’ve been doing about some of them lately.  This tutorial will be on how to make your own FABRIC BUNTING to hang as a decoration.

I personally used this process when I made my friend’s bunting for her little fella’s room as well as the bunting for our little girl’s nursery.  Without further ado – here we go.

INFO YOU NEED TO KNOW:

* Each flag is double sided

* To make ONE bunting flag you need two triangle pieces cut out – a front and back (they can even be different fabrics if you like)

* There are no set seam allowance for this as we will be drawing our sewing lines

* Set your stitch length to something you are happy with as the seams are visible (I have a Janome machine so my stitch length was 3)

* I like to fold my fabric for this project WRONG SIDES TOGETHER, so that once the flags are cut they are in the pairing I want and don’t have to match up sides and such.  Saves a step later on.

* Figuring out how many flags you need can be determined two ways

1. Where you are going to put it.  If you have a wall that is 8 feet (96 inches) and each flag is roughly 6″ you will need 16-17 flags (96″ divided by 6 = 16 flags).  I say 17 flags so that your flags don’t have to pulled tightly and can have a bit of a bow in the middle of them.  This also means you will need about 3 yards of double fold bias tape (add about 5-8 inches onto each end as a tail)

2. I did it a bit of a round about way.  I have 5 fabrics that I wanted to use.  I could get 6 flags out of each piece of fabric making 30 flags.  Which meant I needed 180″ (5 yards) of double fold bias tape.

MATERIALS NEEDED

* Sewing machine in good working order

* Straight stitch sewing foot

* Fabric for your bunting flags – Home decor or quilting cotton

* Note: If you use quilting cotton you will need to add iron on interfacing onto one of the flags to give it a bit more stability and shape.  I used a medium weight, but a light weight also works

* Note: the fabric could be scraps measuring 6 1/4″ x 6 1/2″ or strips of fabric 6 1/2″ x WOF

*Note:  I used pieces of Twill fabric that were cut into 6.5″ x WOF (my WOF was 54″ which gave me 6 flags per strip, usually I get 5 flags per strip using a quilting cotton whose WOF is 40″)

* Coordinating Thread (though you could use something that stands out if you wish)

* Marking Tool

* Rotary Cutter and cutting Mat

* Ruler

* EZ TRI TOOL by Darlene Zimmerman (that makes 6″ x 6 1/4″ triangles)

* Iron and ironing board

* Pinking shears

* Double Fold Bias Tape – in your color choice

* straight pins

DIRECTIONS (based on using strips of fabric):

Ensure your fabric is pressed before starting – it is just easier to cut that way.

1. Determine how many flags you are going to make so you know how many fabric strips you are going to cut.

* You can get 5 flags (front and backs) using a piece of quilting cotton measuring a WOF of 43″

* You can get 6 flags (front and backs) using a piece of twill/home decor measuring a WOF of 54″

2. Fold your fabric selvedge to selvedge and cut a strip that measures 6.5″ (again I folded mine wrong sides together)

3. Lay your Tri Tool on top of your fabric to make your first cut.

Using your rotary cutter, cut along the right side of the ruler.  (I say right side because I am a right handed cutter.  If you are a left handed cutter, please make the adjustments that you need).

Once you are finished cutting your piece it should look like the picture above.  I did slide the rest of the fabric off to the side, just to show you the cut edge.

4.  Rotate your cut piece of fabric so that you can now remove the other edge of fabric with your rotary cutter.

Once cut, you will have one flag with a front piece and a back piece.

5.  Slide the rest of strip fabric back into place to continue cutting out your flags.   With your Tri Tool, line up the edge of the fabric with the edge of your ruler.  Depending how you cut your first flag will determine how you place your ruler.  Using your rotary cutter, cut along the right side of the tri tool ruler.

6. Rotate your ruler to line up with the edge of your last cut and once again cut along the right side of the Tri Tool Ruler.

You will notice in the picture below that I left the second flag to show you the rotation of the ruler.

7.  Continue to rotate your tri tool ruler until all of your flags are cut out of that strip of fabric.   (sorry for the fabric change – the first photo did not turn out).

Below are the 6 flags that I was able to cut out using my 54″ wide fabric.  As I mentioned above this is a twill fabric so I did not feel as though I needed to interface them as they had a good weight to them in the first place.

If you are using quilting cotton and want to have a bit more stiffness in the fabric,  you will also need to cut out interfacing at some point during the cutting process.  If you have 6 flags (front and back) total you will need 6 triangles of interfacing, not 12 because you are not interfacing both sides of each triangle, just one side of the triangle.

A suggestion:  If you are mixing fabrics, home decor and quilting cotton, interface the cotton so it has a similar stiffness.

8.  Once you have all of the flags (front and back) cut out, it is now time to do some marking.  You will need your ruler and your marking tool.  I used a chalk marking tool so that the lines I drew I could easily wipe away.

Using your ruler find 1/4″ from the SIDE edge and following the straight edge draw the 1/4″ line from the top of the flag to the bottom of the flag.  This is the line we will be sewing along.

Then, using your ruler once more mark a line that is 1/8″ from the SIDE edge – this is going to be our guideline for our pinking shears.

Once you have marked one side, flip your flag around and mark the other side.  Your flag will look like…..

Repeat this step for ALL of your Flags.  I only mark one side of my flags, but I do try and keep them together during this step.  Sometimes it works, sometimes not.

Note: If you would prefer to use your 1/4″ piecing foot rather then draw your sewing line – that is fine, just ensure that your sewing line is a 1/4″ away from your side edges.

9.  Finally it is time to sew!  Set up your machine with the thread choice that you have selected for your stitching.  Remember, the thread is visible so if you select a contrasting color it will definitely stand out.  I went for a neutral thread choice for both my top thread and bobbin because I wasn’t looking for a stand out thread.

Also make sure you’ve adjusted your stitch length to something you would be happy to see.  As mentioned I set mine to 3.

Put your first bunting flag (front and back) in ready position in your machine.  I placed my needle ON the 1/4″ line as my guide for my stitching.  One your flag is in place stitch along the 1/4″ line.

As you can see, I am using my basic straight stitch foot so I am able to see that chalk line a bit better.

Once you get to the INTERSECTION where your 1/4″ line intersects you will have to try and get your needle down AS CLOSE TO THAT INTERSECTING POINT as possible so you can put your needle down and pivot your fabric and stitch along the other side.

Repeat for ALL your bunting flags

10. Once you are finished stitching your bunting flags together, it is now time to take your pinking shears to the edges for a decorative finish and to help prevent fraying.   Using your pinking sheers follow along the 1/8″ line and trim off the that little bit of fabric.
This is a bit messy – just as a warning to you.

Once finished pinking both sides your flag will look like…

Not bad, if I do say so myself.

11.  Before we get to this next step you will need to take some time and decide how you want your flags to be arranged and which flags will be beside which flag.  In a random order, a color order?

Once that is decided you will need to get out your Double Fold Bias tape.  You can usually find them at your fabric store in pre cut packages like the one below, or off the bolt.  There were out of the tape off the roll so I have to purchase the pre cut tape.  I needed about 5 yards but the smallest pack was  6.5 m (7.1 yards) so I had some extra – just in case I suppose.  I will use it for something else I know.

11.  Once you have your flag order it is time to place the flags into the Double Fold Bias Tape which will connect all the flags together.  Leaving yourself about a 4-8″ tail (this is a personal preference), open up the DFBT (double fold bias tape) and place the top of your flag as close as you can to the FOLD in the DFBT.

Once you are happy with the first flag placement, pin the flag in place using a straight pin

12.  Get the next flag in your bunting over and overlap the top edge of the second flag and the first flag (only a touch).  Then pin the flag in place.

Continue this pinning your flags in place until ALL flags have been added to the DFBT.  I also found it helpful to pin the intersections of the flags to help keep those pesky edges in place.

Remember to add the same amount of tail to the back end as you did your front.

13.  Carefully, pick up your flags pinned to the DFBT and head back to your trusty sewing machine.  We now need to stitch the flags in place.  I used the same color thread as my flags, but the choice once again is up to you.

Because your flags should be close to the fold of the DFBT you don’t have to top stitch them in place.  Instead find a place on the DFBT that you would like to stitch – down the middle, towards the top, towards the edge.

I used the edge of my foot as my guide and lined the edge of my foot with the bottom edge of my bias tape.  I then moved my needle to a place where I was happy to have the stitches – it worked out to be a scant 1/4″ (little less than a 1/4″) from the bottom edge.

Start stitching from the END of your tail with a couple of back stitches to hold everything in place, then continue to stitch along your bias tape.

Be careful though, sometimes those silly flag ends untuck themselves as you stitch so you might have to keep an eye out and make adjustments if your flags move around.

Once you get to the end of the DFBT remember to take a couple of back stitches to finish the bunting off.

VIOLA!  You are done.  Congratulations.  Now you can hang them where ever you had planned to.

I hope you enjoyed my tutorial on Fabric Bunting.  If you have any questions please feel free to leave them in the comments section and I will answer them in there or via email.  If you find any part of the tutorial confusing please let me know and I will make a change to help clear things up.

If you made some fabric bunting, I would love to see it and hear about it.

23 Comments

Filed under Baby Girl, Everyday Life, Sewing

The Nursery

With every day bringing the birth of our first baby closer it seemed only right that I should get the nursery finished.  And I am very pleased to say it is.  So without further ado here it is.  (this is picture heavy)

Photo is taken from the door looking in

View from the closet

This dresser belonged to my Mom and fits just perfectly in the room.  The bunny and the owl on the dresser are both from Indigo Books.  The monitor is the Philips Avent Dect (which we found at WestCoast Kids).  The art on the wall is called Tiny Dancer by Oopsy Daisy  – which we also found at West Coast Kids.  The knob on the closet if from Anthropologie.

Here is our change table.  The table was a sofa table that we had, but never was able to use.  Nate painted it white for us instead of the dark expresso that it was originally.  The change pad was given to us by a friend, but I made the cover for it.    The bucket under the table, which is our hamper (I know it is small, but it oddly holds a lot, actually all of her clothes at once, I tried it out) I found at Canadian Tire.  The cute lady bug lunch bag was given to her by a good friend at a baby shower.  The fabric box on the table which holds our diapering supplies was found at the Home Depot, its part of the Martha Stewart Collection and it is in the color called Lagoon.

And the crib.  It is the SUNDVIK crib from Ikea.  The crib skirt and all the fabric for the bed linens come from Baby Bedding.  I purchased the crib skirt because I liked theirs better than anything I could create, but I made the crib sheets and the pillows.

The stuffies inside the crib were gifts that our girl was given.  Aren’t they fun?

The art work for the wall comes from Yassis Place on Etsy, though the frames are from IKEA.   I find something similar on pinterest, but then went digging through Etsy to find just the right one.  What was terrific about it was that the person who did the pictures used a fabric sample as her colors.  It just happened to be the same fabric I was using so it matched perfectly.  The bunting along the top I made using the scraps from the linens I made.

This rocking chair was given to me by my parents.  It the one that was in our nurseries.  The chair pad for it came again from Baby Bedding.   The fun owl box is from my brother – it is currently holding some amazing books that she was given by my good friend.  The pink blanket was made by my Great Grandma Pauls.  She made each of the grandchildren a blanket.  She recently passed away, in April, at 102 years of age.

The book slings I first saw in my friend Joey’s nursery and I fell in love with them and decided one day we too would have them.  The tutorial I used to make them is at Penny Carnival.    The fabric I used is also from Baby Bedding.  They are a quick afternoon project and hold a great number of books – depending how big you make them.

Here is our window seat, which I know is not in front of the window.  The window seat is from Homedepot and is part of the Martha Stewart Home Collection as are the fabric boxes below – they called it their storage bench.  It originally came with this ugly tan colored fabric so I recovered it with some fabric I found on the Babybedding.com site (mist, gray and white chevron).

And finally above the door we put the last of the bunting – I made too long of a piece so we trimmed it up and put it here.

So this is where I and the little girl will be hanging out.  I find the room to be calming and relaxing which I don’t think will be too bad those first few weeks.

 

14 Comments

Filed under Baby Girl, Everyday Life, Quilting, Sewing